Intermec PB42 PB42/PB42c Portable Receipt Printer User's Guide - Page 14
Using the Batteries
View all Intermec PB42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Using the Batteries The PB42/PB42c uses lithium-ion 2400 mAh batteries (Model 318-015-001) for power. You can operate the PB42/PB42c with one or two batteries installed. You must fully charge the batteries before you can use the PB42/PB42c. Fully charged batteries can last for up to one week without needing to be recharged. Use Intermec battery pack model 318-015-001 only. Use of another pack may present a risk of fire or explosion. The battery pack used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100 °C (212 °F), or incinerate. Dispose of used battery packs promptly. Keep away from children. Installing the Batteries Make sure you fully charge the batteries before you use your PB42/PB42c. You can charge the batteries before or after you install them into the PB42/PB42c. You can use one battery to power the PB42/PB42c, but you may experience reduced performance. To install the batteries 1 Pull and hold the battery cover latch firmly toward the front of the printer and lift up on the battery cover. 14 PB42/PB42c Portable Receipt Printer User's Guide