Intermec PB42 PB42/PB42c Portable Receipt Printer User's Guide - Page 21
Printing a Configuration Test - firmware
View all Intermec PB42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Printing a Configuration Test Page After you have loaded the media in the printer, you are ready to print out the configuration test page. Use this information for reference when installing your PB42/PB42c and to verify proper printer operation. If you cannot get the configuration test page to print, see "Troubleshooting" on page 28 for help. To print the configuration test page • Press and hold the Feed and Radio buttons until the printer emits the Button sound and the page starts to print. The printer prints out a configuration test page containing information about the printer configuration, the wired configuration, the wireless configuration and the fonts and graphics available on the printer. -Intermec PB42 Printer Configuration- Serial Number : 12345678901 Firmware : PB42F3932_032806 (Ver 3.32) Hardware : RevA-001, Flash 4MB, Ram 16MB Batteries : #1 8.5V #2 8.5V Low Battery Indicator: 6.6V Dark Adjust : Level 4 (0%) Emulation : PB42_REL2 Temperature : 34C Allow Messages from Printer: Off Wired (RS-232) Configuration: Baud Rate : 115200 Parity : None Data Bits : 8 Stop Bits : 1 Flow Control : Hardware Example of Printer and Serial Port Configuration Settings PB42/PB42c Portable Receipt Printer User's Guide 21