Intermec PB42 PB42/PB42c Portable Receipt Printer User's Guide - Page 34

Cleaning the PB42/PB42c, Printer Part, Cleaning Method, Cleaning Interval - printer parts

Get Intermec PB42 PDF manuals and user guides View all Intermec PB42 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Cleaning the PB42/PB42c Printer Part Printhead Platen roller Paper sensor Tear bar Exterior Interior Cleaning Method Use 70% isopropyl alcohol on a cotton swab to clean the print elements from end to end. Rotate the platen roller and clean it thoroughly with 70% isopropyl alcohol on a cotton swab. Clean thoroughly with 70% isopropyl alcohol and a cotton swab. Clean thoroughly with 70% isopropyl alcohol and a cotton swab. Clean with a waterdampened cloth. Brush or air blow. Make sure the paper sensor is free of dust. Cleaning Interval After every five rolls of media or more often if necessary. After every five rolls of media or more often if necessary. After every five rolls of media or more often if necessary. As needed. As needed. After every five rolls of media or more often if necessary. 34 PB42/PB42c Portable Receipt Printer User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
34
PB42/PB42c Portable Receipt Printer User’s Guide
Cleaning the PB42/PB42c
Printer Part
Cleaning Method
Cleaning Interval
Printhead
Use 70% isopropyl alcohol
on a cotton swab to clean the
print elements from end to
end.
After every five rolls
of media or more
often if necessary.
Platen roller
Rotate the platen roller and
clean it thoroughly with 70%
isopropyl alcohol on a cotton
swab.
After every five rolls
of media or more
often if necessary.
Paper sensor
Clean thoroughly with 70%
isopropyl alcohol and a
cotton swab.
After every five rolls
of media or more
often if necessary.
Tear bar
Clean thoroughly with 70%
isopropyl alcohol and a
cotton swab.
As needed.
Exterior
Clean with a water-
dampened cloth.
As needed.
Interior
Brush or air blow. Make sure
the paper sensor is free of
dust.
After every five rolls
of media or more
often if necessary.