JVC DVP7U Instruction Manual - Page 41

Program AE With Special Effects

Page 41 highlights

Program AE With Special Effects IMPORTANT: Some modes of Program AE with special effects cannot be used with certain Wipe/Fader effects. (੬ pg. 39) If an unusable mode is selected, the indicator of Wipe/Fader effects blinks or goes out. 1 Set the Power Switch to "M" while pressing down the Lock Button located on the switch. 2 Open the LCD monitor fully, or pull out the viewfinder fully. PROGRAM AE EN 41 3 Set "r PROGRAM AE" to the desired mode. (੬ pg. 38) ● The selected mode indicator appears. To deactivate the selected mode... Select "OFF" in step 3. NOTES: ● Program AE with special effects can be changed during recording or during Record-Standby. ● Some modes of Program AE with special effects cannot be used during Night-Alive. ( : Factory-preset) Indicator - 6 Parameter OFF NIGHTALIVE SHUTTER 1/60 SHUTTER 1/100 SPORTS SNOW SPOTLIGHT Description Deactivates Program AE with special effects. Night-Alive (NIGHTALIVE) Makes dark subjects or areas even brighter than they would be under good natural lighting. The recorded image may look as if it is strobing due to the slow shutter speed. ● The shutter speed is automatically adjusted to provide up to 30 times sensitivity. ● " " appears beside " " while the shutter speed is being automatically adjusted. NOTES: ● During Night-Alive, the following functions or settings cannot be activated and its indicator blinks or goes out: • Some modes of "Program AE With Special Effects" (੬ pg. 41). • "GAIN UP" in CAMERA Menu. (੬ pg. 44) • "DIS" in MANUAL Menu. (੬ pg. 45) ● During Night-Alive, it may be difficult to bring the camcorder into focus. To prevent this, use of a tripod is recommended. (Variable Shutter Speed) The shutter speed is fixed at 1/60th of a second. Black bands that usually appear when shooting a TV screen become narrower. The shutter speed is fixed at 1/100th of a second. The flickering that occurs when shooting under a fluorescent light or mercury-vapour lamp is reduced. (Variable Shutter Speed: 1/250 - 1/4000) This setting allows fast-moving images to be captured one frame at a time, for vivid, stable slow-motion playback. The faster the shutter speed, the darker the picture becomes. Use the shutter function under good lighting conditions. Compensates for subjects that may otherwise appear too dark when shooting in extremely bright surroundings such as in the snow. Compensates for subjects that may otherwise appear too bright when shooting under extremely strong direct lighting such as spotlights. NOTE: "SPOTLIGHT" has the same effect as -3 with the exposure control. (੬ pg. 55) CONTINUED ON NEXT PAGE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

EN
41
IMPORTANT:
Some modes of Program AE with special effects
cannot be used with certain Wipe/Fader effects.
(
±
pg. 39) If an unusable mode is selected, the
indicator of Wipe/Fader effects blinks or goes out.
1
Set the Power Switch to “
M
” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Set “
r
PROGRAM AE” to the desired mode.
(
±
pg. 38)
The selected mode indicator appears.
To deactivate the selected mode…
Select “OFF” in step
3
.
NOTES:
Program AE with special effects can be changed
during recording or during Record-Standby.
Some modes of Program AE with special effects
cannot be used during Night-Alive.
PROGRAM AE
(
: Factory-preset)
Program AE With Special Effects
Indicator
Parameter
Description
OFF
Deactivates Program AE with special effects.
NIGHTALIVE
Night-Alive (NIGHTALIVE)
Makes dark subjects or areas even brighter than they would be under
good natural lighting. The recorded image may look as if it is strobing
due to the slow shutter speed.
The shutter speed is automatically adjusted to provide up to 30
times sensitivity.
” appears beside “
” while the shutter speed is being
automatically adjusted.
NOTES:
During Night-Alive, the following functions or settings cannot be
activated and its indicator blinks or goes out:
• Some modes of “Program AE With Special Effects” (
±
pg. 41).
• “GAIN UP” in CAMERA Menu. (
±
pg. 44)
• “DIS” in MANUAL Menu. (
±
pg. 45)
During Night-Alive, it may be difficult to bring the camcorder into
focus. To prevent this, use of a tripod is recommended.
SHUTTER 1/60
(Variable Shutter Speed)
The shutter speed is fixed at 1/60th of a second. Black bands that
usually appear when shooting a TV screen become narrower.
SHUTTER 1/100
The shutter speed is fixed at 1/100th of a second. The flickering that
occurs when shooting under a fluorescent light or mercury-vapour
lamp is reduced.
SPORTS
(Variable Shutter Speed: 1/250 – 1/4000)
This setting allows fast-moving images to be captured one frame at a
time, for vivid, stable slow-motion playback. The faster the shutter
speed, the darker the picture becomes. Use the shutter function
under good lighting conditions.
SNOW
Compensates for subjects that may otherwise appear too dark when
shooting in extremely bright surroundings such as in the snow.
SPOTLIGHT
Compensates for subjects that may otherwise appear too bright when
shooting under extremely strong direct lighting such as spotlights.
NOTE:
“SPOTLIGHT” has the same effect as –3 with the exposure control.
(
±
pg. 55)
6
CONTINUED ON NEXT PAGE