JVC DVP7U Instruction Manual - Page 74

74 EN USING THE REMOTE CONTROL UNIT (cont.) Make Connections Also refer to page 24 and 25. Connector Cover*** To S/AV connector To S-VIDEO IN* S/AV/Editing cable (provided) Editing Extension cable (provided)** To AUDIO, VIDEO ABTo Remote PAUSE or R.A.EDIT VCR CTo PAUSE IN 1 A A JVC VCR equipped with a Remote PAUSE connector... ...Connect the editing cable to the Remote PAUSE connector. B A JVC VCR not equipped with a Remote PAUSE connector but equipped with an R.A.EDIT connector... ...Connect the editing cable to the R.A.EDIT connector. C A VCR other than above... ...Connect the editing cable to the remote control's PAUSE IN connector. 2 Insert a recorded tape into the camcorder. 3 Set the VIDEO/MEMORY Switch to "VIDEO". 4 Set the Power Switch to "P" while pressing down the Lock Button located on the switch. 5 Turn the VCR power on, insert a recordable tape and engage the AUX mode. ● Refer to the VCR's instructions. NOTES: ● Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape. To choose whether or not the following displays appear on the connected TV... • Date/Time Set "DISPLAY" to "AUTO", "ON" or "OFF". (੬ pg. 38, 48) Or, press DISPLAY on the remote control to turn on/off the date indication. • Time Code Set "TIME CODE" to "ON" or "OFF". (੬ pg. 38, 48) • Playback Sound Mode, Tape Speed And Tape Running Displays Set "ON SCREEN" to "LCD" or "LCD/TV". (੬ pg. 38, 48) ● When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of the S/AV/Editing cable. However, it is necessary to connect the editing cable of the S/AV/Editing cable to the VCR. (For details, see step 1.) TV DISPLAY * Connect when your TV/VCR has an S-VIDEO IN connector. ** If necessry, use this cable for connections. *** When connecting the cable, open the cover.