JVC DVP7U Instruction Manual - Page 7
How To Attach The Grip Belt, How To Attach The Strap
UPC - 046838161001
View all JVC DVP7U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
How To Attach The Grip Belt 1) Remove the pad and separate the two straps. EN 7 How To Attach The Strap 1) Thread one end of the strap through the eyelet, then pass the other end through the loop. 2) Thread one end of the strap g through the eyelet, then pass the other end through the loop. g h 2) Attach the screw to the tripod mounting socket. To tighten the screw firmly, use a coin, etc. 3) Repeat the same procedure to attach the strap h to the other eyelet. 4) Connect the strap g and h and thread the strap h through the buckle, then adjust the grip. (੬ pg. 12) 3) Adjust the length with the adjuster. 5) Attach the pad. NOTES: ● You can use the strap as a shoulder strap by adjusting the length with the adjuster. ● Because the screw may cause damage to the camcorder, make sure to attach the screw to the tripod mounting socket when carrying the camcorder. ● Use the strap only with this camcorder. ● Do not grip the camcorder too firmly when the screw is attached. Doing so may cause damage to the tripod mounting socket.