JVC DVP7U Instruction Manual - Page 91
After Use, Cleaning The Camcorder
UPC - 046838161001
View all JVC DVP7U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
USER MAINTENANCE EN 91 After Use 1 Turn off the camcorder. 2 Slide down and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically. Remove the cassette. 3 Press "PUSH HERE" to close the cassette holder. ● Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover. 4 Slide down BATT.RELEASE 1 and remove the battery pack 2 3. Cassette holder cover Cassette holder Remove. PUSH HERE OPEN/EJECT Switch Cleaning The Camcorder 1 To clean the exterior, wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth. 2 Open the LCD monitor. Wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor. 3 To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper. 4 Pull out the viewfinder fully. 5 Open the viewfinder cleaning hatch in the direction of the arrow A. Insert a lens blower or soft cloth into the gap at the side of the viewfinder and clean the interior of the viewfinder with it B. ● If the gap is narrow, turn the Diopter Adjustment Control to widen the gap. 6 Close the hatch until it locks in place and push the viewfinder back in. NOTES: ● Avoid using strong cleaning agents such as benzine or alcohol. ● Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. ● Mould may form if the lens is left dirty. ● When using a cleaner or chemically treated cloth refer to the cautions of each product. Hatch Lens blower BATT.RELEASE Switch Diopter Adjustment Control