JVC DVP7U Instruction Manual - Page 61

To make video clips from recorded video footage Stop Button (8) VIDEO/MEMORY Switch Play/Pause Button (4/9) Power Switch SNAPSHOT Button Lock Button E-MAIL Button EN 61 To view video clips stored in a memory card... Refer to "Playback Of Video Clips" (੬ pg. 29). To delete unwanted video clips stored in a memory card... Refer to "Deleting Files" (੬ pg. 33). NOTES: ● Playback operation cannot be performed during E-Mail Clip Recording. ● If the end of the tape is reached during E-Mail Clip Recording, that portion will be automatically stored in the memory card. ● If the end of the tape is reached in step 7, the E-Mail Clip Record-Standby mode will be automatically cancelled. ● The video clip files stored with this camcorder are compatible with MPEG4. Some MPEG4 files stored with other devices cannot be played back with this camcorder. ● Video noise may appear while viewing video clips in the LCD monitor or viewfinder, however, this noise is not present in the actual video clips stored in the memory card. ● You can also view video clips on your PC by using Windows® Media Player version 6.4 or later. Refer to the instructions of PC and software. 1 Load a cassette. (੬ pg. 16) 2 Load a memory card. (੬ pg. 17) 3 Set the VIDEO/MEMORY Switch to "VIDEO". 4 Set the Power Switch to "P" while pressing down the Lock Button located on the switch. 5 Set "E-CLIP REC" to the desired image size. (੬ pg. 38, 60) 6 Press 4/9 to start video playback. 7 Press E-MAIL to engage the E-Mail Clip Record- Standby mode. ● "E-MAIL CLIP STANDBY"and "PUSH "SNAPSHOT" TO RECORD CLIP TO CARD" appears. ● To cancel E-Mail Clip Recording, press E-MAIL again or press 8 to stop video playback. 8 At the point you want to start dubbing, press SNAPSHOT to start E-Mail Clip Recording. 9 Press SNAPSHOT to stop E-Mail Clip Recording. ● "COMPLETED" is displayed, then the camcorder re-enters the E-Mail Clip Record- Standby mode. 10 Press E-MAIL to end E-Mail Clip Recording. The normal screen reappears.