JVC DVP7U Instruction Manual - Page 58

58 EN NAVIGATION Function The Navigation Function helps you check tape contents by making thumbnail images on a memory card. VIDEO/MEMORY Switch Power Switch Lock Button SNAPSHOT Button NAVI Button MENU Button To make thumbnail images during tape recording 1 Load a cassette. (੬ pg. 16) 2 Load a memory card. (੬ pg. 17) 3 Set the VIDEO/MEMORY switch to "VIDEO". 4 Set the Power Switch to "A" or "M" while pressing down the Lock Button located on the switch. 5 Set "NAVIGATION" to the desired navigation time. (੬ pg. 38, 47) ● The " " appears blinking on the screen. Wait until it stops blinking. If it does not stop blinking after a while, check if a memory card is loaded. 6 Press the Recording L P 1 0 0min Start/Stop Button to PAUSE start tape recording. The image of the point where recording is started is captured. ● If the Recording Start/Stop button is Displayed while the pressed before captured image is being " " stops stored in the memory blinking, the image card. FEATURES FOR RECORDING (cont.) of the point where the loaded memory card is recognised is captured. ● If the recording time is over the navigation time set in step 5, " " appears briefly and the captured image is stored in the memory card as a thumbnail image. 7 Press the Recording Start/Stop Button to stop tape recording. NOTES: ● The remaining number of storable thumbnail images also appears on the screen when it reaches 10 or less. If "REC SELECT"is set to " /" in DSC Menu, the number shows how many 640 x 480 pixel images can be stored. ● If "5S" is set to "5S" or "Anim." in MANUAL menu, the NAVIGATION function will not work properly. To find scenes on tape using thumbnail images (NAVIGATION Search) 1 Load a cassette. (੬ pg. 16) 2 Load a memory card. (੬ pg. 17) 3 Set the VIDEO/MEMORY switch to "VIDEO". 4 Set the Power Switch to "P" while pressing down the Lock Button located on the switch. 5 Press NAVI during video playback or stop mode. ● The loaded cassette's NAVIGATION thumbnail image screen appears. NAV I GAT I ON DATE : MAY 22 6 ' 0 2 33: :0 0AM TC : 13 : 23 : 15 1 2 3 ● Turn the SHUTTLE SEARCH Ring to the 4 5 006 left (3) to display the previous page. Turn the SHUTTLE SEARCH Ring to the right (5) to display the next page. 6 Press + or - to select the desired image, and press SET/SELECT. ● The "NAVIGATION SEARCH" indication appears blinking and the camcorder starts searching the tape for the relevant point of the selected thumbnail image. To cancel NAVIGATION search midway... Press 4/9 or 8, or turn the SHUTTLE SEARCH Ring to the left (3) or to the right (5).