JVC DVP7U Instruction Manual - Page 84
Troubleshooting Cont.
UPC - 046838161001
View all JVC DVP7U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
84 EN Advanced features TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 14. The focus does not adjust automatically. 14. • Focus is set to the Manual mode. • The recording was done in a dark place, or the contrast was low. • The lens is dirty or covered with condensation. 14. • Set Focus to the Auto mode. (੬ pg. 54) • Clean the lens and check the focus again. (੬ pg. 91) 15. In the 5-Second mode, recording ends before 5 seconds have elapsed. 15. • The 5-Second mode is set to 15. • Set "5S" to "5S" in MANUAL "Anim." in MANUAL Menu. Menu. (੬ pg. 45) 16. Snapshot mode cannot be used. 16. • The Squeeze mode (SQUEEZE) is selected. 16. • Disengage the Squeeze (SQUEEZE) mode. (੬ pg. 46) 17. The color of Snapshot looks strange. 17. • The light source or the 17. • Find a white subject and subject does not include compose your shot so that it white. Or there are various also appears in the frame. different light sources behind (੬ pg. 27, 52) the subject. • Disengage the Sepia (SEPIA) • The Sepia (SEPIA) or and Monotone Monotone (MONOTONE) (MONOTONE). (੬ pg. 42) mode is activated. 18. The image taken using Snapshot is too dark. 18. • Shooting was performed under backlit conditions. 18. • Press BACKLIGHT. (੬ pg. 56) 19. The image taken using Snapshot is too bright. 19. • The subject is too bright. 19. • Set "r PROGRAM AE" to "SPOTLIGHT". (੬ pg. 41) 20. White Balance cannot be activated. 20. • The Sepia (SEPIA) or Monotone (MONOTONE) mode is activated. 20. • Disengage the Sepia (SEPIA) or Monotone (MONOTONE) mode before setting White Balance. (੬ pg. 42, 42) 21. Wipe/Fader effects do not work. 21. • The Power Switch is set to "A". 21. • Set the Power Switch to "M". (੬ pg. 14) 22. The Black & White Fader does 22. • The Sepia (SEPIA) or not work. Monotone (MONOTONE) mode is activated. 22. • Disengage the Sepia (SEPIA) and Monotone (MONOTONE). (੬ pg. 42) 23. Program AE with special effects does not work. 23. • The Power Switch is set to "A". 23. • Set the Power Switch to "M". (੬ pg. 14) 24. Even when Slow Shutter is not selected, the image looks like it is activated. 24. • When shooting in the dark, the unit becomes highly sensitive to light and the image takes on an effect similar to Slow Shutter. 24. • If you want the lighting to look more natural, set "GAIN UP" to "ACG" or "OFF". (੬ pg. 38, 44)