JVC GR-D33 Instruction Manual - Page 15

Playback Using The Remote Control (GR-D93/73 only) The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. (੬ pg. 16) Installing The Battery The remote control uses one lithium battery (CR2025). 1 Pull out the battery holder by inserting a pointed instrument into the slot. 2 Insert the battery in the 2 3 holder, and be sure to have 1 the "+" mark visible. 3 Slide the holder back in 1 Slot until you hear a click. Beam Effective Area (indoor use) When using the remote control, be sure to point it at the remote sensor. The transmitted beam's approximate effective distance for indoor use is 5 m (16 ft). NOTE: The transmitted beam may not be effective or may cause incorrect Remote sensor operation when the remote sensor is directly exposed to sunlight or powerful lighting. VIDEO PLAYBACK EN 15 Buttons And Functions T W A Infrared beam transmitting window The following buttons are available only when the camcorder's Power Switch is set to "PLAY". B AUDIO Button pg. 25, 28) C PAUSE Button pg. 16) Up Button pg. 16) D SLOW Rewind Button pg. 16) E REW Button pg. 14, 20) Left Button pg. 16) F INSERT Button pg. 37) G STOP Button pg. 14, 20) Down Button pg. 16) H SHIFT Button pg. 16) I EFFECT ON/OFF Button pg. 16) J EFFECT Button pg. 16) K SLOW Forward Button pg. 16) L FF Button pg. 14, 20) Right Button pg. 16) M PLAY Button pg. 14, 20) N A. DUB Button pg. 37) O DISPLAY Button pg. 17, 34) The following buttons are available when the camcorder's Power Switch is set to "A" or "M". a S.SHOT (Snapshot) Button* b START/STOP Button* c Zoom (T/W) Buttons pg. 12, 16) * Functions the same as each corresponding button on the camcorder. (੬ pg. 51) ** Functions when the camcorder's Power Switch is set to "PLAY" as well. VIDEO RECORDING & PLAYBACK