JVC GR-D33 Instruction Manual - Page 19

Dubbing Still Images Recorded On A Tape To A Memory Card Still images can be dubbed from a tape to a memory card. 1 Load a cassette. (੬ pg. 10) 2 Load a memory card. (੬ pg. 10) 3 Set the VIDEO/MEMORY Switch to "VIDEO". 4 Set the Power Switch to "PLAY" while pressing down the Lock Button located on the switch. 5 Set " COPY" to "ON". (੬ pg. 25, 28) 6 Press 4/9 to start playback. 7 At the point you want to dub, press 4/9 again to engage Still Playback. 8 To dub the image, press SNAPSHOT. ● The " " indication appears during dubbing. ● The selected image is stored in the memory card. NOTES: ● If SNAPSHOT is pressed in step 8 when a memory card is not loaded, the message "COPYING FAILED" is displayed. ● If an image recorded on the tape using "WIDE MODE" (੬ pg. 26) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it. ● To use Playback Special effects with a video image you wish to dub, perform up to step 8 using the remote control (provided). (੬ pg. 16) ● Images are dubbed in 640 x 480 pixels. D.S.C. RECORDING (GR-D93/D73 only) EN 19 DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK (GR-D93/D73 only)