JVC GR-D33 Instruction Manual - Page 30
Wipe Or Fader Effects, WIPE/FADER, Program AE With Special Effects, PROGRAM AE
UPC - 074101484793
View all JVC GR-D33 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
30 EN FEATURES FOR RECORDING SNAPSHOT Button MMENU/VOL. Power Switch Lock Button VIDEO/MEMORY (GR-D93/73 only) Wipe Or Fader Effects IMPORTANT: Some Wipe/Fader Effects cannot be used with certain modes of Program AE with special effects. (See the right column) If an unusable Wipe/Fader Effect is selected, its indicator blinks in blue or goes out. These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Wipe or Fader works when video recording is started or stopped. 1 Set the VIDEO/MEMORY Switch to "VIDEO". (GR-D93/73 only) 2 Set the Power Switch to "M" while pressing down the Lock Button located on the switch. 3 Open the LCD monitor fully. (੬ pg. 12) 4 Set "v" to the desired mode. (੬ pg. 25) ● The WIPE/FADER menu disappears and the effect is reserved. ● The selected effect indicator appears. 5 Press the Recording Start/Stop Button to activate the Fade-in/out or Wipe-in/out. To deactivate the selected effect Select "OFF" in step 4. The effect indicator disappears. NOTE: You can extend the length of a Wipe or Fader by pressing and holding the Recording Start/Stop Button. WIPE/FADER OFF: Disables the function. (Factory-preset) FADER-WHITE: Fade in or out with a white screen. FADER-BLACK: Fade in or out with a black screen. FADER-B.W: Fade in to a color screen from a black and white screen, or fade out from color to black and white. WIPE-CORNER: Wipe in on a black screen from the upper right to the lower left corner, or wipe out from lower left to upper right, leaving a black screen. WIPE-WINDOW: The scene starts in the center of a black screen and wipes in toward the corners, or comes in from the corners, gradually wiping out to the center. WIPE-SLIDE: Wipe in from right to left, or wipe out from left to right. WIPE-DOOR: Wipe in as the two halves of a black screen open to the left and right, revealing the scene, or wipe out and the black screen reappears from left and right to cover the scene. WIPE-SCROLL: The scene wipes in from the bottom to the top of a black screen, or wipes out from top to bottom, leaving a black screen. WIPE-SHUTTER: Wipe in from the center of a black screen toward the top and bottom, or wipe out from the top and bottom toward the center leaving a black screen. Program AE With Special Effects IMPORTANT: Some modes of Program AE with special effects cannot be used with certain Wipe/Fader effects. (See the left column) If an unusable mode is selected, the indicator of Program AE with Special Effects blinks or goes out. 1 Set the Power Switch to "M" while pressing down the Lock Button located on the switch. 2 Open the LCD monitor fully. (੬ pg. 12) 3 Set "r" to the desired mode. (੬ pg. 25) ● The PROGRAM AE menu disappears and the selected effect is activated. ● The selected effect indicator appears. To deactivate the selected effect Select "OFF" in step 3. The effect indicator disappears. NOTES: ● Program AE with special effects can be changed during recording or during Record-Standby. ● Some modes of Program AE with special effects cannot be used during Night-Alive. PROGRAM AE OFF: Disables the function. (Factory-preset) SHUTTER 1/60: The shutter speed is fixed at 1/ 60th of a second. Black bands that usually appear when shooting a TV screen become narrower. SHUTTER 1/100: The shutter speed is fixed at 1/ 100th of a second. The flickering that occurs when shooting under a fluorescent light or mercury-vapor lamp is reduced.