JVC GR-D33 Instruction Manual - Page 44

44 EN TROUBLESHOOTING CARD ERROR! - (GR-D93/73 only) - Appears when the camcorder does not recognize the loaded memory card. Remove the memory card once and insert it again. Repeat these procedures until no indication appears. If the indication still appears, the memory card is corrupted. UNSUPPORTED FILE! - (GR-D93/73 only) - Appears when playing back a file that is not compatible with DCF or a file with a size that is not compatible with this camcorder. CHECK CARD'S WRITE PROTECTION SWITCH - (GR-D93/73 only) - Appears when you attempt to shoot digital still images when the write protection tab on the SD Memory Card is set to the "LOCK" position. E01, E02 or E06 UNIT IN SAFEGUARD MODE REMOVE AND REATTACH BATTERY The error indications (E01, E02 or E06) show what type of malfunction has occured. When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer. E03 or E04 UNIT IN SAFEGUARD MODE EJECT AND REINSERT TAPE The error indications (E03 or E04) show what type of malfunction has occured. When an error indication appears, the camcorder turns off automatically. Eject the cassette once and re-insert it, then check if the indication clears. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.