JVC GY-HD200UB GY-HD200U Owner's Manual - Page 20
Inserting an SD Memory, Attaching the Tripod Base, Optional
UPC - 046838035616
View all JVC GY-HD200UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
PREPARATIONS How to Attach the Viewfinder (Cont'd) About the Viewfinder Cable Attach the viewfinder cable to the clamp 7 on page 14. To reduce the emission of unwanted radio waves, be sure to attach the provided core filter as shown in the figure below. • Attach the core filter (black) as close to this device as pos- sible, as shown in the figure. 3. Close the SD memory card cover. Cutout SD memory card cover Taking out the SD memory card 1. Push the SD memory card in the direction of the arrow. • The SD memory card comes out slightly. 2. Pull the SD memory card straight out. Core filter (black) Inserting an SD Memory Card By using an SD memory card, you can save and call up menu settings and camera settings for this device. X See "FILE MANAGE Menu Screen" on page 96. Check that the POWER switch is OFF. Inserting an SD Memory Card 1. Open the SD memory card cover. 2. Face the cutout end of the SD memory card inward and insert it in the direction of the arrow. CAUTION Be sure not to touch the metal connector area of the SD memory card. About SD Memory Cards • When you use an SD memory card that is either new or was formatted on a device other than this device, format it on this device. X See page 98. Recommended SD memory cards Panasonic: 16 MB to 2 GB • You can write-protect the card so that saved files are not mistakenly erased. Set the switch on the side of the SD memory card to the "LOCK" position. LOCK switch 34 MEMO SDHC-compliant memory cards cannot be used with this device. Attaching the Tripod Base (Optional) Use the optional tripod base to place the camera on a tripod. 1. Attach the tripod base on the tripod by using the hole that balances this device most optimally. CAUTION • The front base mount may be locked while the pin of the tripod base is not inserted into the hole on the rear base mount of this device. Therefore, after mounting, make sure that these parts are engaged properly. • When moving this device mounted on a tripod, any impact or vibration should be avoided as this may cause this device to become detached and to drop from the tripod. Be sure to remove this device from the tripod before transporting it. 1. Tripod mounting holes 2. While pushing the safety lever, pull the lock lever toward the front until the front mount clip clicks into place. Front mount clip 3. Pin 2. Safety lever 2. Lock lever 3. Place this device on the tripod base by aligning the rear base mount of this device with the pin on the tripod base. 4. Front base mount 3. Rear base mount 4. Hold the camera on the top and slide forward so that the base mount of the camera is locked by the front mount clip of this device as it clicks into place. 4. MACRO VF BRIGHT USER 1 USER 2 USER 3 ND FILTER 2 1 MENU STATUS WHT.BAL AUTO AUTO AUDIO CH-1 LEVEL CH-2 ON OFF POWER REC 35