JVC GY-HD200UB GY-HD200U Owner's Manual - Page 35

USING EXTERNAL COMPONENTS Dubbing with AV Devices 5. Set the audio output. X See page 62. Set the AUDIO menu screen. X See page 84. AUDIO menu screen By connecting the video signal output terminal and the AUDIO OUTPUT terminal on this device to an AV device, analog signal dubbing is possible. 1. Connect the cables. Composite cable or Component cable CH2-AUDIO OUT-CH1 VIDEO Signal flow IEEE 1394 Recording unit AUDIO OUTPUT connector Signal flow 2. Turn both devices on. 3. Set this device to VTR mode. Press the CAM/VTR button. The VTR indicator lights. 4. Set the video output. Set the VIDEO FORMAT menu screen. X See page 74. VIDEO FORMAT menu screen • PB AUDIO CH [DV] item: Set the audio channel to be output. 6. Insert the videocassettes. This device : Insert the recorded videocassette. Recording unit : Insert the videocassette to be dubbed to. 7. Press the PLAY/STILL button on this device to start play- back. 8. Start recording on the recording unit. For details, see the instructions to the unit used for recording. 9. When dubbing is completed. Stop recording on the recording unit, and then press the STOP button on this device to stop playback. • HDV PB OUTPUT item: Set the video format to be output from the video output terminal during tape playback. • PB TAPE item: Select whether to automatically detect the playback tape video format or play back only a particular format. Normally, use the "AUTO" setting. HDV/DV Dubbing Connecting this device to another video component equipped with HDV/DV connector (IEEE1394 standard) using a IEEE1394 cable (optional) enables dubbing of digital signals with high picture quality and high-quality sound. Using this device as the playback unit (Dubbing to another video) 1. Set the IEEE1394 switch on the left panel of this device. DV : When dubbing in DV format HDV : When dubbing in HDV format 2. Connect the IEEE1394 cable. 3. Turn both devices on. 4. Set this device to VTR mode. Press the CAM/VTR button. The VTR indicator lights. 1. IEEE1394 switch CH2-AUDIO OUT-CH1 VIDEO IEEE 1394 Recording unit Signal flow 2. IEEE1394 cable CAUTION • Set the IEEE1394 switch on both devices to either HDV or DV. • Start recording after making sure that both devices are properly connected. 5. Set the PB TAPE item on the VIDEO FORMAT menu screen. X See page 76. Select whether to automatically detect the playback tape video format or play back only a particular format. Normally, use the "AUTO" setting. VIDEO FORMAT menu screen 6. Insert a videocassette tape. This device : Recorded videocassette tape Recording unit : Videocassette you want to dub 7. Press the PLAY/STILL button on this device to start play- back. 8. Start recording on the recording device. See the recording device user manual for more informa- tion. 9. When dubbing is finished, stop recording on the record- ing device, press the STOP button on this device, and stop the playback. MEMO • Switch the IEEE1394 switch when this device is OFF. • When you dub still images, they are low resolution images. Noise may also enter the audio. • Operations may differ depending on the features and specifications of the connected device, and operations or data exchange may not be possible even if the devices are connected. • If noise appears on the screen or the audio cuts out, reconnect the IEEE1394 cable or turn this device on again. • If you turn the power to the device connected to the IEEE1394 connector on and off or switch the video input, noise may occur in the audio. If you perform this type of operation, set the speaker volume as low as possible on the audio device connected to this device. • Recording may not be possible in some cases even if the recorder is equipped with a IEEE1394 connector. 64 65