JVC GY-HD200UB GY-HD200U Owner's Manual - Page 34

PLAYBACK MODE Outputting Audio Setting Confirm that this device is in the VTR mode. (VTR indicator: On) MONITOR VTR indicator SELECT switch SHUTTER dial STATUS button VF BRIGHT USER 1 USER 2 USER 3 ND FILTER 2 1 MENU STATUS WHT.BAL AUTO AUTO AUDIO CH-1 LEVEL CH-2 ON OFF POWER REC LCD BRIGHT - + CAM/VTR AUDIO SELECT CH-1 CH-2 AUTO MANU TC DISPLAY TC UB GENE. FREE REC REGEN CAM/VTR button AUDIO menu screen 1. Display the AUDIO menu screen. Select the AUDIO item on the TOP MENU screen. 2. Set the AUDIO menu screen. • PB AUDIO CH [DV] Items CH1/2 : To reproduce the sound (CH-1, CH-2) recorded during shooting. MIX : To reproduce the sound recorded during shooting (CH-1, CH-2) and the after- CH3/4 recorded sound (on CH-3 and CH-4) simultaneously. : To reproduce the sound after-recorded on CH-3 and CH-4. PB AUDIO CH [DV] CH1/2 MIX CH3/4 AUDIO OUT connector CH-1 CH-2 CH1 CH2 CH1+CH3 CH2+CH4 CH3 CH4 For HDV format, audio is output to CH1 and CH2 no matter the settings. 3. Either of the following operations returns you to the nor- mal screen. • Press the STATUS button or • Return to the TOP MENU screen, select the EXIT item and press the SHUTTER dial. MEMO The DV format is capable of recording up to 4 channels when the 12-bit, 32 kHz sampling frequency is employed. This device records audio on the two channels CH-1 and CH-2. (4-channel recording is possible in the case of DV input.) When this device is used for playback of a tape that was recorded on another unit with audio recorded on the CH-3 and CH-4 channels, the PB AUDIO CH [DV] item on the AUDIO menu screen must be set. After-recording on the CH-3 and CH-4 channels is not possible. „ Earphone terminal output audio Audio output is as shown in the table below depending on the MONITOR SELECT switch and AUDIO MONITOR and PB AUDIO CH [DV] settings on the AUDIO menu screen. MONITOR SELECT CH-1 BOTH CH-2 PB AUDIO CH [DV] AUDIO MONITOR CH1/2 - L/R: CH1 MIX STEREO L/R: CH1+CH2 L: CH1 R:CH2 - L/R: CH2 MIX CH3/4 L/R: CH1+CH3 L/R: CH3 L/R: CH1+CH2+CH3+CH4 L/R: CH3+CH4 L: CH1+CH3 R: CH2+CH4 L: CH3 R: CH4 L/R: CH2+CH4 L/R: CH4 * In HDV format, you can only select the settings within the bold frame. USING EXTERNAL COMPONENTS Connecting the Video Signal Cables Connecting the IEEE1394 Cable To reduce the emission of unwanted radio waves, be sure to attach the provided clamp filter as shown in the figure below. • Attach the clamp filter as close to this device as possible, as shown in the figure. • Set the IEEE1394 switch on the left panel of this device. DV : DV format HDV : HDV format IEEE1394 switch Clamp filter Displaying Alarms • CHANGE 1394 SWITCH Displayed when the setting for the input/output video format from the IEEE1394 connector and the setting for the IEEE1394 switch are different. Set the IEEE1394 switch so it matches the video format. CHANGE 1394 SWITCH Wind once CH2-AUDIO OUT-CH1 VIDEO IEEE 1394 CAUTION When connecting the IEEE1394 cable from/to Camcorder, VCR and other IEEE1394 device, make sure the following instructions, otherwise the IEEE1394 circuit device may be destroyed. • Turn the power of both devices OFF and connect the IEEE1394 cable. • Do not insert incorrectly (in reverse) the IEEE1394 cable end to IEEE1394 port of both devices. X • Do not connect the IEEE1394 cable under the condition of static electricity. • Turn the power of both devices OFF when changing the IEEE1394 switch from/to HDV/DV. IEEE 1394 IEEE 1394 62 63