JVC GY-HD200UB GY-HD200U Owner's Manual - Page 75

CONTROLS, INDICATORS AND CONNECTORS Indications on the LCD Monitor and in the Viewfinder (Cont'd) Auto White Balance Indication (Camera mode only) The AUTO WHITE indication and the result of the operation are displayed during the auto white balance adjustment operation. X See "White Balance Adjustment" on page 52. Alarm Message Display • The following alarm messages are displayed while the STATUS (0, 1, 4) screen is shown in the Camera mode, or a STATUS screen is shown in the VTR mode. If an alarm is generated while the STATUS 2, 3 screen is shown, the STATUS 0 screen returns to display the alarm. X See page 106. • When an abnormality occurs in the VTR, a warning message with an error code is displayed. X See pages 106-108. Menu Setting Screen Screen used for making various settings. The Menu Setting Screen appears when the STATUS button is pressed for 1 second or more. X See "Setting Menu Screens" on page 75. Alarm display area TOP MENU screen (Camera mode) Safety Zone Indication (Camera mode only) The indication of the following safety zone and center mark indications can be turned ON/OFF with the SAFETY ZONE item and CENTER MARK item on the LCD/VF[1/4] menu screen. X See page 89. In addition, the safety zone display is on or off depending on the REC item setting and the ASPECT item setting in the VIDEO FORMAT menu screen, as shown below. SAFETY ZONE OFF 4:3 14:9 16:9 16:9+4:3 CENTER MARK - OFF ON OFF ON OFF ON OFF ON REC ASPECT DV-60I DV-50I DV-24P 4:3 DV-24PA DV-25P 16:9 Cannot be selected HDV-HD60P HDV-HD50P HDV-HD30P HDV-HD25P HDV-HD24P [16:9] 30 SAFETY ZONE CENTER MARK DV-60I DV-50I 4:3 DV-24P DV-24PA DV-25P 16:9 HDV-HD60P HDV-HD50P HDV-HD30P HDV-HD25P HDV-HD24P [16:9] 2.35:1CE OFF ON Cannot be selected 2.35:1CH OFF ON Switching between the LCD Screen and Viewfinder Display „ When the LCD+VF item in the LCD/VF[4/4] menu is set to OFF, the LCD monitor and viewfinder (VF) displays are as shown below. LCD Monitor Status LCD Closed Normal LCD Inverted LCD LCD Open Normal LCD Inverted LCD LCD Display OFF ON ON ON VF Display ON OFF OFF OFF MEMO • You can switch between the LCD monitor and the viewfinder by holding down the DISPLAY button for about 2 seconds. • After you set up the function that switches the display between the LCD monitor and the viewfinder by holding down the DISPLAY button, the display mode is cancelled by the LCD monitor open/close and normal/inverted operations. • If the LCD monitor is closed inside this device with the screen in the normal display orientation, holding down the DISPLAY button does not work. „ When the LCD+VF item in the LCD/VF[4/4] menu is set to ON, the LCD monitor and viewfinder (VF) displays are as shown below. LCD Monitor Status LCD Closed Normal LCD Inverted LCD LCD Open Normal LCD Inverted LCD LCD Display OFF ON ON ON VF Display ON ON ON ON MEMO • Press the DISPLAY button for 2 seconds to switch the LCD screen display ON and OFF. • The viewfinder screen is always displayed. DISPLAY button Normal LCD Inverted LCD LCD open 40° or more LCD close less than 40° 31