JVC GY-HM710U GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 129
Checking Videos Recorded on the, External Device
View all JVC GY-HM710U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
5 Set the external device to a mode that enables recording. For setting and operation of external devices, refer to the instruction manual of the respective devices. Note : ● Adjust the camera recorder and external device to the same IEEE1394 settings. ● Start recording only after ensuring that the devices are properly connected. 6 Perform recording using the camera recorder. If the settings in 3 are appropriate, video images will be recorded to the camera recorder and external device. Note : ● Images, audio and time code at the points where recording starts and ends may be out of sync depending on the camera recorder and backup device in use. Memo : ● When backup recording starts, a ATRIGGER TO EXTB message appears on the LCD monitor and viewfinder for about 3 seconds. �Checking Videos Recorded on the External Device (IEEE1394 Input mode of Media mode) When images are displayed in thumbnails in Media mode (SD Card mode) and power of the device connected to the [IEEE1394] terminal is turned on, pressing the [CAM/MEDIA] selection button displays the playback images of the connected device on the LCD monitor and viewfinder. (Only for HD video systems) Pressing the same button has no effect if the [IEEE1394] connection is not recognized, such as when the power of the device connected to the [IEEE1394] terminal is turned off. When an SD video system is in use, availability of the [IEEE1394] terminal connection cannot be detected in Media mode (SD Card mode). Allow the camera recorder to detect the [IEEE1394] terminal connection in advance by turning on the power of the connected equipment in Camera mode. Refer to [Status Screen in IEEE1394 Input Mode] (A Page 107) for the status display of this mode. 1 Set the [Record Format] menu according to the input video format. (A Page 75) 2 Press the [CAM/MEDIA] button to set to the IEEE1394 Input mode. 3 Set the external device to the playback mode. Video images recorded on the external device are displayed on the LCD monitor and viewfinder. Note : ● This mode is used for viewing images input to the [IEEE1394] terminal from an external device, and not intended for recording input images on the camera recorder. 123