JVC GY-HM710U GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 82
Record Set Menu, continued
View all JVC GY-HM710U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Menu Display and Detailed Settings Record Set Menu (continued) Rec Mode Menu Item Rec Mode Frame Rate When [Frame & Bit Rate] is A30p (HQ)B When [Frame & Bit Rate] is A24p (HQ)B When [Frame & Bit Rate] is A25p (HQ)B Pre Rec Time Slot Mode Setting Values Normal Pre Rec Clip Continuous Variable Frame 60, 48, 40, 30, 24, 20, 15, 12, 10 60, 48, 40, 30, 24, 20, 15, 12, 10 50, 40, 25, 20, 15, 12.5, 10 5sec, 10sec, 20sec Series Dual Function For selecting the record mode for recording to the SDHC card. (A Page 58) Memo : ● [Variable Frame] is selectable when [Camera Resolution] is set to A1280x720B, and [Frame & Bit Rate] is set to A30p (HQ)B, A24p (HQ)B, or A25p (HQ)B. For setting the recording [Frame Rate] when [Rec Mode] is set to [Variable Frame]. Memo : ● When [AE LEVEL] in the [Main Menu] B [Camera Function] B [Switch Set] menu is set to AAE LEVEL/VFRB, you can use the cross-shaped button (H I) to select the frame rate during Variable Frame Rec. In modes other than Variable Frame Rec, the cross-shaped button (H I) functions as the [AE LEVEL] setting button. (A Page 80) ● When [Frame Rate] is changed and the shutter speed becomes a value that is invalid for the current [Frame Rate], the shutter speed is automatically changed to match the current [Frame Rate]. For setting the pre-recording time when [Rec Mode] is set to APre RecB. For setting the operation of the card slot. (A Page 57) Series : Mode that activates the two slots sequentially. Dual : Mode that activates the two slots at the same time. Memo : ● When this is set to ASeriesB, and recordable media are loaded to both the slots, pressing the [REC] button starts recording only to the card in the selected slot (active slot). ● When this is set to ADualB, and recordable media are loaded to both the slots, pressing the [REC] button starts simultaneous recording to the cards in both slots. Clip Set Menu * Default values are indicated in bold characters. Item Clip Name Prefix Reset Clip Number Setting Values xxxG (The default value of xxx is the last three digits of the serial number.) ^ Function For setting the first four characters of the name of the clip file to be recorded to the SDHC card. Enter any of the 38 characters including alphabets (upper case), numbers (0 to 9), "_" (underscore), and "-" (hyphen) using the software keyboard. ( A Page 71 [Text Input with Software Keyboard]) For assigning a new number to (Clip Number) by resetting it (0001). Select [Reset] and press the Set button (R) to reset the number. When other clips exist on the SDHC card, the smallest available number is used after reset. Example: If the [Clip Name Prefix] is AABCDB, and AABCD0001B already exists on the SDHC card, AABCD0002B will be assigned. 76