JVC GY-HM710U GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 83
Audio Set Menu
View all JVC GY-HM710U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Audio Set Menu Item Input1 Mic Ref. Setting Values -50dB -60dB Input2 Mic Ref. -50dB -60dB Mic Wind Cut Both Input2 Input1 Off Audio Ref. Level -12dB -20dB Audio Limiter On Off Test Tone On Off Function For setting the reference input level when the [AUDIO INPUT1] button is set to AMICB or AMIC+48VB. -50dB : Sets -50 dB as the reference value. -60dB : Sets -60 dB as the reference value. For setting the reference input level when the [AUDIO INPUT2] button is set to AMICB or AMIC+48VB. -50dB : Sets -50 dB as the reference value. -60dB : Sets -60 dB as the reference value. For selecting whether to cut the low frequencies of the audio input signals (low-cut) when the [AUDIO INPUT 1/2] button is set to AMICB or AMIC+48VB. Set this item to reduce wind noise from the microphone. Both : Enables low-cut on both the [INPUT1] and [INPUT2] terminals. Input2 : Enables low-cut on the audio of the [INPUT2] terminal only. Input1 : Enables low-cut on the audio of the [INPUT1] terminal only. Off : Disables low-cut. For setting the audio reference level to be recorded to the SDHC card. (Applies to both [CH1/CH2].) -20dB : Outputs signals of the reference level when the meter is at -20 dBFS. -12dB : Outputs signals of the reference level when the meter is at -12 dBFS. For specifying whether to trigger the limiter when the [AUDIO SELECT CH-1/CH-2] switch is set to AMANUALB. On : Triggers the limiter when excessive audio signals are input, and compresses the recording level. Off : Does not trigger limiter. For specifying whether to output the audio test signals (1 kHz) during color bar output. On : Audio test signals are output. Off : Audio test signals are not output. 77