JVC GY-HM710U GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 97
Setting Values, Function, TC/UB, Audio Meter, Battery Info, Date Style, Time Style, Shutter Disp.
View all JVC GY-HM710U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
* Default values are indicated in bold characters. Item TC/UB Audio Meter Battery Info Setting Values On Off On Off Time Capacity% Voltage Function For specifying whether to display the time code/user's bit rate in the status display on the LCD monitor and viewfinder screens. On : Displays the time code or user's bit rate. Whether time code or user's bit rate is displayed is determined by the setting of the [TC DISPLAY] switch on the inner panel of the camera recorder's LCD monitor. Off : Hides the time code or user's bit rate. For specifying whether to display the audio level meter in the status display on the LCD monitor and viewfinder screens. On : Displays the audio level meter. Off : Hides the audio level meter. For setting the battery information to be displayed on the status screen when an AntonBauer or IDX battery that supports communication is loaded. The status screen is displayed on the LCD monitor and/or viewfinder. The battery information appears only on the STATUS 1 screen in Camera mode. (A Page 102) Time : Displays the remaining battery power in minutes. AminB Capacity% : Displays the remaining battery power in percentage. A%B Voltage : Displays the current battery voltage in units of 0.1 V. AVB Memo : ● When a battery other than the one recommended (communication supported) is used, AVoltageB may sometimes be displayed even when ATimeB or ACapacity%B is selected. ● When ATimeB or ACapacity%B is selected, the battery mark that appears before the value changes according to the remaining battery power. RES : 12 % and below, : 13 % - 29 %, : 30 % - 59 %, 2: 60 % - 100 % ● Display changes to A RES B once the battery power falls below 12 %. ● When calibration of the battery is required, A CAL B appears for 2 seconds after every 30 seconds of the voltage display. ● CALIBRATION is a state that requires renewal of the battery power information. The battery is able to function as usual without calibration. However, calibration is recommended as correct information of the remaining power and time cannot be obtained otherwise. For more details, refer to the instruction manual of the battery. ● The remaining battery power and remaining time are intended as reference values for the shooting duration. ● When an IDX battery is loaded while the camera recorder is connected to a KA-MR100G (Memory Recorder), the ATimeB display setting may be disabled even when a recommended battery (communication supported) is used. Date Style Time Style Shutter Disp. DMY (E model) MDY (U model) YMD 24hour (E model) 12hour (U model) DEG SEC For setting the date display sequence in the status display on the LCD monitor and viewfinder screens. DMY MDY YMD : Day/Month/Year : Month/Day/Year : Year/Month/Day For setting the time display in the status display on the LCD monitor and viewfinder screens. 24hour 12hour : 24-hour display. : 12-hour display. (AM/PM) For setting the shutter display in the status display on the LCD monitor and viewfinder screens. DEG SEC : Displays the shutter speed in degrees in the same way as film cameras. : Displays the shutter speed in seconds. Memo : ● ADEGB is selectable only when [Frame & Bit Rate] is set to A24p (SP)B, A24p (HQ)B, A25p (SP)B, or A25p (HQ)B. When [Frame & Bit Rate] is set to other values, the shutter display setting is fixed at ASECB and cannot be selected. (A Page 75) ● When a remote control unit is connected, the shutter display setting is fixed at ASECB regardless of the [Frame & Bit Rate] setting. 91