JVC KD NX5000 Instructions - Page 109
Troubleshooting, Symptoms, Causes/Remedies
UPC - 046838027093
View all JVC KD NX5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes/Remedies • Parking Brake appears on the monitor. • Sound cannot be heard from the speakers. • The monitor is not clear and legible for watching the playback picture or the map. • Low Temperature/HDD Warming Up appears and some functions do not work properly. Some operations are prohibited without the parking brake engaged. Park the car in a safe place before the operations. • Adjust the volume to the optimum level. • Check the cords and connections. Sunshine from the windshield may cause this symptom. Adjust Bright and Contrast of Screen Control. (☞ [96]). The internal temperature is too low. Leave the power on, and wait until the internal temperature rises and the indication goes off. General • Push Reset appears on the display, and the control panel movement is freezed. Something is blocking the control panel movement. Remove the obstacle, then reset the unit (☞ [4]). • If this does not work, check if the installation has been correctly done. • The unit does not work at all. Reset the unit (☞ [4]). • Cannot operate some functions of an AV source on the map screen. On the map screen, you can operate only some limited functions of the current source. Press SRC to display the AV screen and operate the source. • Cannot operate AV sources with the remote controller on the map screen. On the map screen, 4¢5∞ keys of the remote controller always works for scrolling the map. • Route calculation seems to have stopped. Route calculation may take long depending on the route. Wait for a while. • Navigation voice cannot be heard from Guidance voice level is set to the minimum level. the speakers. Adjust it to the optimum level. (☞ [43]) • Voice guidance are not heard while viewing an AV screen. Interruption is set to Off. Set it to On to allow the voice guidance interrupt the AV source. (☞ [44]) • The voice guidance does not come out Change the Output Channel setting. (☞ [43]) from the speaker on the driver's side. • Cannot scroll the map to northeast, etc. To scroll to northeast, you need to press 5 and ¢ at the same time. Navigation Maintenance / Troubleshooting 109