JVC KD NX5000 Instructions - Page 94

ENGLISH Menu items Interlock Horizontal/ Vertical Selectable settings (Initial setting) Off: Cancels. Reverse: Automatically switch to the camera view when the gear is shifted into reverse.*8 Low Speed: Automatically switch to the camera view when your car slows down.*9 Horizontal adjustment is required according to how you would like to see the picture on the monitor. Vertical adjustment is required according to how you have installed your camera. Horizontal: Normal Horizontal: Reverse Vertical: Normal Setup ] Input For Camera Video Format*10 Beep Telephone Muting Reverse Polarization Connection*12 Vertical: Reverse Select the format of video input according to the color system of the component connected to the VIDEO IN plug. NTSC, PAL Off: Cancels. On: Activates the key-touch tone. You can mute the sound of the System (AV source sounds and voice guidance) while you talk on the cellular phone. Off: Cancels. Muting1, Muting2: Select either one which mute the sounds while using the cellular phone.*11 Select either of the two which indicates your gear direction correctly. GND, Battery You can check the connection status. Setup ] Others *8 Reverse lamp lead connection is required. (☞ Installation/Connection Manual) *9 Speed signal lead connection is required. (☞ Installation/Connection Manual) *10 Not selectable when Video Input is set to Off. *11 The TEL MUTING lead connection is required. (☞ Installation/Connection Manual) *12 This shows the same information as Connection in the Information Menu (☞ [43]). 94