JVC KD NX5000 Instructions - Page 89

Phone Menu (continued) Setup*3 Menu items Connect*3 Disconnect*3 Delete Pair*3 Auto Connect Auto Answer*4 Message Info*4 Microphone Level*4 Version Selectable settings (Initial setting) Only for the registered devices. After selecting a device from among the registered devices (☞ [85, 87]), establish the connection with it. ☞ [85] Only for the device being connected. Disconnect the current device before connecting another device. ☞ [85] Only for the registered devices. Delete the registered devices. ☞ [85] When the unit is turned on, the connection is established automatically with... Off: No Bluetooth device. Last: The last connected Bluetooth device. Order: The available registered Bluetooth device found at first. Only for the device being connected for "Bluetooth Phone." Off: The unit does not answer the calls automatically. Answer the call manually. On: The unit answers the incoming calls automatically. Reject: The unit rejects all incoming calls. Only for the device being connected for "Bluetooth Phone." Auto: The unit informs you of the arrival of a message by ringing and displaying Receiving Message. To read the message, press ENT (☞ [87]). Manual: The unit does not inform you of the arrival of a message. Only for the device being connected for "Bluetooth Phone." Adjust microphone volume connected to the Bluetooth adapter. 1, 2, 3 The Bluetooth software and hardware version is shown. *1 Selectable items vary depending on the connected device. *2 Selectable only when the device is compatible with text message. *3 Also available in Mode in AV Menu for Bluetooth Audio. *4 Not selectable for New Device. Bluetooth Information: If you wish to receive more information about Bluetooth, visit our JVC web site. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor Company of Japan, Limited (JVC) is under licence. Other trademarks and trade names are those of their respective owners. Using Bluetooth devices 89