JVC KD NX5000 Instructions - Page 99

Additional Information General • There is a time limit for some operations. In this case, if no further operation is done for a certain period, the current operation is canceled. • By pressing SRC or MAP on the unit, you can also turn on the power. The map screen is displayed at turn-on if you press MAP, and an AV screen if you press SRC. If the source is ready, playback starts. • You cannot select some sources if they are not ready. - SAT/CD-CH: cannot be selected without connecting the target source component. - DISC: cannot be selected if a disc is not in the loading slot. - EXT-IN: cannot be selected without selecting Ext Input for the External Input setting. (☞ [93]) - Bluetooth Audio: cannot be selected if a Bluetooth adapter is not connected. • If you turn off the power while DISC is selected as the source, disc play will start automatically next time you turn on the power. • The voltage and the speed on the vehicle information screen may be different from the actual values. Listening to the radio Storing stations in memory • When SSM is over, all previously stored stations are erased and stations are stored newly. • When SSM is over, received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency), and preset station No. 1 is tuned in. • When storing a station manually, a previously preset station is erased when a new station is stored in the same preset number. Satellite radio operations • You can also connect the JVC SIRIUS radio PnP (Plug and Play), using the JVC SIRIUS radio adapter, KS-U100K (not supplied) to the CD changer jack on the rear. By turning on/off the power of the unit, you can turn on/off the JVC PnP. However, you cannot control it from this unit. • To know more about SIRIUS Satellite radio or to sign up, visit . • For the latest channel listings and programming information, or to sign up for XM Satellite radio, visit . Sound equalization / Additional information 99