JVC KD NX5000 Instructions - Page 8
Introduction, Initial settings, Turn on the power., Adjust the following settings. - installation manual
UPC - 046838027093
View all JVC KD NX5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
ENGLISH Initial settings When you turn on the unit for the first time, the initial setup screen appears. Follow the procedure below and make necessary settings. Turn on the power. Language English US Español Français Adjust the following settings. Select an item Proceed to the next setting Back to the previous setting 1 Language Select the language you want for the display and the voice guidance. 2 Store Display Mode Select Off. • If you select On, the System starts in the navigation demonstration mode for shops. (☞ [47]) 3 Installation Angle Select which angle your unit is installed at. This setting is necessary for the precise functioning of the Navigation System. • See "Measuring the installation angle" on the Installation/Connection Manual. 4 Time Zone Select your residential area for clock adjustment. 5 DST Select Auto if your residential area is subject to DST (Daylight Saving Time). 6 Reverse Polarization Engage the parking brake, step on the brake pedal, then switch the gear lever. If Forward and Reverse alternates on the display, connection is correct. Select one of the alternatives (GND or Battery) that shows the gear position correctly. Finish the procedure. You can also change these settings (except Store Display Mode) through Setup Menu and AV Menu when necessary. • Language ☞ [46] • Installation Angle ☞ [46] • Time Zone ☞ [91] • DST ☞ [91] • Reverse Polarization ☞ [94] 8