JVC KW-V30BT Instruction Manual - Page 55

CONNECTION/INSTALLATION Connection ❏ Connecting wires to terminals Page 57 USB terminal: Pages 56 - 57 Connect the antenna cord to the antenna terminal. Page 58 Pages 56 - 57 REVERSE Purple with white stripe GEAR SIGNAL (Reverse sensor wire) PARKING Light green BRAKE (Parking sensor wire) 10 A fuse Connect SiriusXM Connect Vehicle Tuner (commercially available).*1 (Page 57) 1 White ª / White with black stripe · : To front speaker (left) Gray ª / Gray with black stripe · : To front speaker (right) Connect to the vehicle's reverse lamp harness when using the optional rear view camera. Connect to the vehicle's parking 3 brake detection switch harness. • For best safety, be sure to connect the parking sensor. *1 Only for KW-V50BT Region 1/KW-V30BT Region 1. *2 If no connections are made, do not let the cable come out from the tab. Green ª / Green with black stripe · : To rear speaker (left) Purple ª / Purple with black stripe · : To rear speaker (right) Blue (Power antenna wire) *2 (POWER ANTENNA) To automatic antenna if any (250 mA max.) Blue with white stripe (Remote output wire) (REMOTE OUTPUT) To the remote lead of other equipment (200 mA max.) Light blue with yellow stripe (Steering remote control wire) To the OE remote adapter matching your car (STEERING WHEEL REMOTE) Orange with white stripe (Dimmer control wire) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) (ILLUMI) To car light control switch (ACC) (BATT) (GND) To car chassis Ignition key switch Fuse box Battery ENGLISH 55