JVC VN-C215VP4U Instruction Manual - Page 21
Mounting the camera via electrical box, Remove the camera unit from the base, Pg. 17
UPC - 046838030192
View all JVC VN-C215VP4U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Mounting the camera via electrical box Mount the base to an electrical box. 1. Remove the camera unit from the base (A Pg. 17) 2. Mount the base to the electrical box Use two mounting holes and two M4 screws to mount the base to the electrical box. Memoɿ ● M4 screws are not supplied. 4 inch square electrical box M4 screw (not supplied) 3. The following procedures are the same as normal mounting ● Cable connection (A Pg. 18) ● Mounting the camera to the base (A Pg. 19) ● Image adjustment (A Pg. 28) ● Mounting the inner dome (A Pg. 30) ● Mounting the dome cover (A Pg. 30) 21
21
Mount the base to an electrical box.
1.
Remove the camera unit from the base
(
A
Pg. 17)
2.
Mount the base to the electrical box
Use two mounting holes and two M4 screws to
mount the base to the electrical box.
Memo
:
●
M4 screws are not supplied.
3.
The following procedures are the same as
normal mounting
●
Cable connection (
A
Pg. 18)
●
Mounting the camera to the base
(
A
Pg. 19)
●
Image adjustment (
A
Pg. 28)
●
Mounting the inner dome (
A
Pg. 30)
●
Mounting the dome cover (
A
Pg. 30)
Mounting the camera via
electrical box
4 inch square electrical box
M4 screw (not supplied)