JVC VN-C215VP4U Instruction Manual - Page 26
Heater cable connection, LAN Cable Connection
![]() |
UPC - 046838030192
View all JVC VN-C215VP4U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Setup Heater cable connection LAN Cable Connection Connect the camera to a hub or computer using a LAN cable. Ⅵ When connecting to a hub Make use of a straight cable. Ⅵ When connecting to a computer Make use of a Cross Over cable. Wind the waterproof tape AC24 V power supply Solder or crimp Insulation tape Heater power cable (White, Gray) 10BASE-T/ 100BASETX(PoE) terminal LAN cable Noteɿ ● When installing a heater unit (sold separately: KA-ZH215) to this product, be sure to connect to AC 24 V. ● When installing a heater unit (sold separately: KA-ZH215), read the heater instruction manual carefully before installing. ● The AC 24 V power supply should conform to the following : Class 2 only (Fou USA), Isolated power supply only (For Europe). ● Please consult your nearest JVC dealer regarding heaters. ⅷ About heater cables Maximum extension Conductor Diameter (mm) 40 m (130 ft) R1.0 120 m (390 ft) R1.6 180 m (590 ft) R2.0 Noteɿ ● Cross cables cannot be used with some computer models. When connecting VNC215VP4U directly to a computer, make sure to check the computer's LAN specifications in advance. Memoɿ ● Sealed cables are recommended for outdoor use. ● Make use of a Category 5 (or higher) cable in the case of 100BASE-TX. 26
![](/manual_guide/products/jvc-vnc215vp4u-instruction-manual-facbf33/26.png)