Kenmore 8027 Use and Care Guide - Page 17
Final, Installation, Check - model
UPC - 719192272088
View all Kenmore 8027 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
I I FINAL INSTALLATION CHECK Once you have completed the installation of the dryer and it is in its final location, confirm proper operation with the following steps and tests. O Is gas turned ON? (Gas Models only) O Is dryer plugged in? Dryer should always be plugged in to the proper outlet. Gas dryer should use a 120-VAC, 60-Hz. grounded 3-prong outlet. @ Electric dryer should use a 4-wire connection which is required for all mobile and manufactured home installations, as well as all new construction after January 1, 1996. -- OR -- © A 3-wire connection. NOTE: A 3-wire connection is NOT permitted on new construction after January 1, 1996. O Is dryer vent ductwork connected? O Is dryer level? O Perform the following tests before using the dryer. Testing Dryer Heating GAS MODELS O Close the dryer door. O Press the Power button to turn the dryer on. O Turn Cycle Selector Knob to Normal drying cycle. O Press the Cycle Selector Knob to start the dryer. When the dryer starts, the igniter should ignit the main burner. NOTE: If all air is not purged from the gas line, the gas igniter may turn off before the main burner ignites. If this happens, the igniter will reattempt gas ignition until all the air is purged from the gas line. ELECTRIC MODELS O Close the dryer door. O Press the Power button to turn the dryer on. O Turn Cycle Selector Knob to Normal drying cycle. O Press the Cycle Selector Knob to start the dryer. The exhaust air should be warm after the dryer has been operating for 3 minutes. Checking Venting Vent ductwork should be checked for lint buildup and cleaned at least once per year. If any noticeable reduction in drying performance occurs, check ductwork for obstructions and blockages. Checking Levelness Once the dryer is in its final location, recheck the dryer to be sure it is level. Make sure it is level front to back and side to side, and that all 4 leveling feet rest firmly on the floor. 17 I I