Kenwood C-V351 User Manual - Page 46

Timer operation Two 24-hour timer systems (TIMER 1, TIMER 2) (which can 46 be used every day) and a sleep timer system (which works only once) are available. In each of TIMER 1 and TIMER 2, the timer data including the operating period and played contents can be set and selected to be activated or not as required. Timer reservation is possible for the two types TIMER 1 and TIMER 2 at the same time. ÷ Please make reservations with an interval of at least one minute, so that the operation times of TIMER 1 and TIMER 2 do not overlap. C-V351/C-V301 (EN) Timer playback, timer recording (TIMER 1, TIMER 2) With each of the two timer programs, a selected source can be played (or radio broadcast can be recorded) in the previously set time period. Sleep timer The unit is put to STANDBY mode automatically after the specified period has elapsed. o Timer programming 1 Make preparations for the play (recording). ÷ To listen to radio ÷ To listen to CD/LD/MD /DVD ÷ To listen to tape The station should be Insert a disc. preset before timer pro- (Program playback is not posgramming.[ [ •ª sible.) Insert a tape. ÷ For broadcast recordings Make prepara- tions for record- ing. '∞ If tapes are inserted in both decks A and B, playback starts with the tape in deck B. 2 Adjust the listening volume. Main unit VOLUME CONTROL DOWN 3 Set the Main unit ÷ The VOLUME CONTROL should be set to the desired volume while UP the unit is ON. (ON/STANDBY) switch to STANDBY. ON/STANDBY 4 Select a TIMER No. Main unit 1 Select the timer number. TIMER MODE 2 Press immediately after selection. TIMER SET Each press of the key switches the TIMER numbers as follows. 1 TIMER 1 2 TIMER 2 3 TIMER 1,2 4 OFF TIMER 1 ÷ The selected TIMER No. lights. ÷ If a previously programmed TIMER No. is selected, the contents will be replaced by the new contents programmed. ÷ The timer programming operation is not possible when TIMER 1,2 have already been selected.