Kenwood C-V351 User Manual - Page 7

About the system control connections System connection C-V351/C-V301 (EN) 7 When this unit is connected to KENWOOD audio component system "SERIES 21", also connect them through the system control cords to allow system-control operations between components. Connection example AV CONTROL CENTER SYSTEM CONTROL The SERIES 21 components which can be system-connected with this unit include the LD player, MD recorder, and DVD player. POWER AMPLIFIER GRAPHIC EQUALIZER CASSETTE DECK CD PLAYER System control cord SYSTEM CONTROL SYSTEM CONTROL System control cord SYSTEM CONTROL System control cord Notes 1. Do not connect the SERIES 21 components to other system components using system control cords. 2. Do not connect system control cords to any components other than those specified by KENWOOD. It may cause a malfunction and damage your equipment. 3. Be sure the system control plugs are inserted all the way in to the system control terminals. About the system control operations (Available operations when SERIES 21 components are connected through system control cords) Remote Control Lets you operate source components with the system remote supplied with this unit. Automatic Operation When you start playback from a source component, the input selector on this unit switches to that component automatically. (Except TAPE 2) Synchronized Recording Lets you synchronize recording with the start of playback when recording from CD or LD. Connection of flat-cable connector Inserting the connector Removing the connector Push in the connector straight into the socket until it clicks to indicate the locking. Push and hold the two ends of the connector, and pull it straight outward. Notes 1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced. 2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unplugging connection cords without removal of the power cord can cause malfunctions or damage to the unit. 3. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit. 4. If the system control cords or audio cords are not connected properly, the remote control or automatic operation between system components will not work properly.