Kenwood TS-590SG Operation Manual - Page 64
Lock Functions, Programmable Function Keys
![]() |
View all Kenwood TS-590SG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
12 OPERATOR CONVENIENCES LOCK FUNCTIONS FREQUENCY LOCK FUNCTION Frequency Lock disables some keys and controls to prevent you from accidentally activating a function or changing the current settings. Press and hold [FINE (F.LOCK)] to turn the Frequency Lock function ON or OFF. • " " appears while this function is ON. The following keys and controls are disabled by Frequency Lock: Key Tuning control MULTI/CH control [ENT] [M.IN] [SCAN] Mic [UP] Mic [DWN] [A/B] [M/V] [SPLIT] Band direct key [M>V] [LSB/USB] [CW/FSK] [FM/AM] [DATA] [MHz] [FINE] [CWT] Comments Still operates in TF-SET mode. Still operates for changing setting modes. Still operates for character selection and for changing setting modes. Still operates for character selection and for changing setting modes. Also still operates for setting up scan groups (press and hold). Still operates in TF-SET mode (in VFO mode) during Menu mode when the Mic key paddle operation is ON. Still operates in TF-SET mode (in VFO mode) during Menu mode when the Mic key paddle operation is ON. Still operates to change between FM and FM Narrow (press and hold). Still operates to cancel Frequency Lock (press and hold). Still operates to turn AGC ON/ OFF (press and hold). 56 Key [CLR] [Q-MR] [Q-M.IN] Comments Still operates to turn Memory Channel Lockout ON/OFF. Also still operates to end a setting mode. Still operates to edit a Memory name. Still operates to set or remove a Slow Scan Frequency point (press) or to remove all frequency points (press and hold). PROGRAMMABLE FUNCTION KEYS TRANSCEIVER FRONT PANEL There are 6 PF (Programmable Function) keys on the transceiver front panel: [PF A], [PF B], [RIT], [XIT], [CL], and [MULTI/CH]. You can assign your own desired functions to these 6 keys by accessing Menu Nos. 87 (PF A), 88 (PF B), 89 (RIT), 90 (XIT), 91 (CL), 92 (MULTI/CH: except CW mode) and 93 (MULTI/CH: CW mode). MICROPHONE KEYS There are 4 microphone PF (Programmable Function) keys: [PF1] , [PF2] , [PF3], and [PF4]. You can assign your own desired functions to these 4 keys via Menu Nos. 94 to 97. You can also reprogram the Mic [UP]/ [DWN] keys with your desired function by accessing Menu Nos. 99 and 98. Assign one of the following functions to each PF key. Selecting "OFF" assigns no function to the PF key. No. Function 00 ~ 99 Menu No. 00 ~ 99 120 RX ANT 121 ATT 122 ANT1/2 123 PRE 124 VOX 125 PROC 126 SEND 127 AT 128 CAR 129 MIC 130 TX-MONI 131 PWR 132 DELAY 133 KEY Remark Press and hold: enter the level setup mode. Press and hold: enter the level setup mode. Press and hold: start the antenna tuning. [MULT/CH] default (except CW mode) [MULT/CH] default (CW mode)
![](/manual_guide/products/kenwood-ts590sg-operation-manual-634c406/64.png)