Kenwood XD-752 User Manual - Page 12
Surround rear speakers, FM outdoor antenna, In regard to the SURROUND switch
View all Kenwood XD-752 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 System connection XD-SERIES (EN/M,T) Preparation section Surround (rear) speakers (XD-7...series only) (RS-N852/optional) R L FM outdoor antenna Lead the 75Ω coaxial cable connected to the FM outdoor antenna into the room and connect it to the FM 75Ω termimal. Use a commercially-available antenna adapter (a small-sized model). −+ −+ Surround switch ·ª 5ON ∞OFF SURROUND SURROUND - + SPEAKERS (8-16Ω) L R ·ª In regard to the SURROUND switch This switch can be used only when the separately sold surround (rear) speakers are connected. When the switch is set to ON, surround playback can be enjoyed. When this switch is set to OFF, normal playback is ex- ecuted. 5ON SURROUND ∞OFF ÷ Please operate this switch while the power is switched off. ÷ We recommend to keep this switch set to OFF when no surround (rear) speakers are connected to obtain a better sound quality. ÷ When the switch is set to OFF, no sound will come from the surround (rear) speakers. ANTENNA FM 75Ω GND AM Reception mode switching of FM broadcast (For Russia) When you want to receive an FM broadcast in PILOT TONE mode, changing the setting as follows. 1 Select the TUNER input. 2 While holding the SELECT key depressed, turn the SOUND CONTROL jog dial to select the system mode. SOUND CONTROL SELECT Main Unit 1 2 3 4 Twist 1 POLAR system 2 PILOT TONE system Polar Pilot Speaker Unit 3 Establish the selection. 1 2 3 4 ENTER Twist