Kenwood XD-752 User Manual - Page 69

Specifications (XD-7...series) Main unit [ Amplifier section ] Rated output power during STEREO operation FRONT (1 kHz, 1.0 % T.H.D., 6 Ω ) Two channel driven 80 W + 80 W Effective output power during STEREO operation FRONT (1 kHz, 10 % T.H.D., 6 Ω ) One channel driven 100 W + 100 W Effective output power during SUPER WOOFER operation FRONT (1 kHz, 10 % T.H.D., 6 Ω ) One channel driven 100 W + 100 W SUPER WOOFER (60 Hz, 10 % T.H.D., 6 Ω ) One channel driven 100 W + 100 W Signal to noise ratio MD/DVD INPUT 90 dB (IHF' 66) Input sensitivity / inpedance MD/DVD INPUT 380 mV / 47 kΩ Output level / impedance MD REC OUTPUT (CD, 0 dB 1.0 V / 10 kΩ [ Tuner section ] FM tuner section Tuning frequency range 87.5 MHz ~ 108 MHz (For Russia 65.0 MHz ~ 74.0 MHz AM (MW) Tuner section Tuning frequency range (For U.K., Europe and Russia) ... 531 kHz ~ 1,602 kHz (Other countories) 9 kHz step 531 kHz ~ 1,602 kHz 10 kHz step 530 kHz ~ 1,610 kHz LW Tuner section (For U.K. and Russia) Tuning frequency range 153 kHz ~ 279 kHz SW Tuner section (XD-772S only) Tuning frequency range 5.9 MHz ~ 17.9 MHz 69 XD-SERIES (EN/M,T) [ Cassette deck section ] Track 4-track, 2-channel stereo Recording system AC bias system (Frequency: 105 kHz) Heads A deck : Playback head 1 B deck : Playback/ recording head 1 Erasing head 1 Fast winding time Approx. 115 seconds (C-60 tape) [ CD player section ] Laser Semiconductor laser Wow & Flutter Less than unmeasurable Limit Digital output (Optical 15 dBm ~ - 21 dBm (Wave length 660 nm) [ General ] Power consumption 160 W Dimensions W : 280 mm H : 330 mm D : 386 mm Weight (net 11.0 kg Speakers (LS-N752/ LS-N702) Enclosure Acoustic air suspension type (magnetically shielded) Speaker configuration Super-woofer 160 mm, cone type Woofer 160 mm, cone type Tweeter 50 mm, cone type Super-tweeter 25 mm, dome type Impedance 6 Ω Peak input level 135 W Maximum input level 120 W Dimensions W : 324 mm H : 330 mm D : 390 mm Weight (net 8.4 kg (1 piece) Knowledge section 1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be Notes changed without notice. 2.Sufficient performance may not be possible at very low temperatures (0°C or less).