Kenwood XD-752 User Manual - Page 32
Let's record, Recording on TAPE
View all Kenwood XD-752 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
32 Let's record Recording on TAPE Note XD-SERIES (EN/M,T) Note that this cassette deck cannot record onto Metal tapes. XD-7...series : The equalizer or 3D surround effect applied to the audio can be recorded together with it. W XD-6...seriesX, XDD-6-8......sseerriieess/:XTDhe-8e.q..usaelirzieerseffect applied to the audio can be recorded together with it, but the effects obtained by surround playback or DSP playback cannot be recorded together with the audio. E XD-6...series XD-8...series XD-7...series 4R D S 1 3 25 Basic section #¡ 1. Load a cassette tape. (Recording is available on deck B only.) A 0 PUSH OPEN 1 1 Open the door of deck B. 2 Insert a tape. 3 Close the door. ÷ Differentiation between normal (TYPE ) and high (TYPE ) tape is set automatically. ÷ Remove tape slack before loading. 2. Select the tape transport direction. To reverse the transport direction & #¡ 2 1 Select deck B by pressing the A/B key. 2 Press the play key corresponding to the desired direction. 3 Stop playback (by pressing the & key). ÷ When recording is started, the tape is transported in the direction selected in this step. ÷ Wind the tape to the position where recording is to be started. Check the tape transport direction indicator. ¶ REV. MODE DOLBY NR 3 3. Set the recording condition. 1 Select the reverse mode. ‹ 2 Select the DOLBY NR mode. (XD-7...series, XD-8...series only) ‹ ÷ The Tape Equalizer cannot be used in recording. (XD-6...series only)