KitchenAid KRFC704FSS Use & Care Guide - Page 30

Interior Cleaning IMPORTANT: Refrigerator shelves with under-shelf, LED lighting are not dishwasher safe. 1. Unplug refrigerator or disconnect power. 2. Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water. NOTE: Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches, or cleansers containing petroleum products on plastic parts, interior and door liners, or gaskets. 3. Plug in refrigerator or reconnect power. Condenser Cleaning There is no need for routine condenser cleaning in normal home operating environments. If the environment is particularly greasy or dusty or there is significant pet traffic in the home, the condenser should be cleaned every 6 months to ensure maximum efficiency. If you need to clean the condenser, please call for service. Lights The lights in both the refrigerator and freezer compartments are LEDs which do not need to be replaced. If the lights do not illuminate when the door or drawer is opened, call for assistance or service. In the U.S.A., call 1-800-253-1301. In Canada, call 1-800-807-6777. Vacation and Moving Care Vacations If You Choose to Leave the Refrigerator On While You're Away: 1. Use up any perishables and freeze other items. 2. If your refrigerator has an automatic ice maker and is connected to the household water supply, turn off the water supply to the refrigerator. Property damage can occur if the water supply is not turned off. 3. If you have an automatic ice maker, turn off the ice maker. ■■ Press the switch to OFF for the door ice maker. 4. Empty the ice bin. If You Choose to Turn Off the Refrigerator Before You Leave: NOTE: Put refrigerator in Showroom Mode while on Vacation. See "Using the Controls" section. 1. Remove all food from the refrigerator. 2. If your refrigerator has an automatic ice maker: ■■ Turn off the water supply to the ice maker at least 1 day ahead of time. ■■ When the last load of ice drops, press the switch to OFF for display to be unlit on the top inside of the refrigerator, depending on your model. 3. Empty the ice bin. 4. Turn off the temperature controls. See "Using the Controls" section. 5. Clean refrigerator, wipe it, and dry well. 6. Tape rubber or wood blocks to the tops of both doors to prop them open far enough for air to get in. This stops odor and mold from building up. Moving When you are moving your refrigerator to a new home, follow these steps to prepare it for the move. 1. If your refrigerator has an automatic ice maker: ■■ Turn off the water supply to the ice maker at least 1 day ahead of time. ■■ Disconnect the water line from the back of the refrigerator. ■■ When the last load of ice drops, press the switch to OFF either on the ice maker or the control, depending on your model. 2. Remove all food from the refrigerator and pack all frozen food in dry ice. 3. Empty the ice bin. 4. Unplug refrigerator. 5. Clean, wipe, and dry thoroughly. 6. Take out all removable parts, wrap them well, and tape them together so they don't shift and rattle during the move. 7. Depending on the model, raise the front of the refrigerator so it rolls more easily OR raise the leveling screws so they don't scrape the floor. See "Adjust the Doors" or "Refrigerator Leveling and Door Closing" section. 8. Tape the doors closed and tape the power cord to the back of the refrigerator. When you get to your new home, put everything back and refer to the "Installation Instructions" section for preparation instructions. Also, if your refrigerator has an automatic ice maker, remember to reconnect the water supply to the refrigerator. 30