KitchenAid KRFC704FSS Use & Care Guide - Page 36

TROUBLESHOOTING First try the solutions suggested here or visit our website at www.kitchenaid.custhelp.com. If you experience Possible Causes Solution Water from the dispenser Water from the dispenser is chilled to This is normal. is warm. 50°F (10°C). The refrigerator has just been installed. Allow 24 hours after installation for the water supply to cool completely. A large amount of water was recently Allow 3 hours for the water supply to cool completely. dispensed. Water has not been recently dispensed. The first glass of water may not be cool. Discard the first glass of water dispensed. The refrigerator is not connected to Make sure the refrigerator is connected to a cold water pipe. a cold water pipe. See "Water Supply Requirements" section. Doors WARNING Explosion Hazard Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire. To view an animation showing how to adjust and align the doors, refer to the Product Help/FAQ section of the brand website and search for "Door Closing and Door Alignment." The doors will not close completely. The doors are difficult to open. The doors appear to be uneven. The refrigerator is unsteady or it rolls forward when opening and closing doors. The door is blocked open. A bin or shelf is in the way. Recently installed The door gaskets are dirty or sticky. The doors need to be aligned or the refrigerator needs to be leveled. The refrigerator brake feet are not snug against the floor. Move food packages away from door. Push bin or shelf back into the correct position. Remove all packaging materials. Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth. See "Refrigerator Leveling and Door Closing" section. Remove the base grille. Turn both brake feet (1 on each side) clockwise, the same amount, until they are snug against the floor. See "Refrigerator Leveling and Door Closing section. 36