Kodak 6850 User Manual - Page 18

Setting Up the Printer Supply spool Bar code 4. Push the bar code end of the supply spool into the spool holder on the right. 5. Place the left side of the supply spool into the spool holder on the left. 6. Rotate the thumb wheel until the lugs on the spool holder lock into the notches on the supply spool. Lugs Notches Thumb wheel Label 7. Remove the label and wrapper from the ribbon. Take-up spool 1-6 8. Push the right side of the take-up spool into the spool holder on the right. 9. Place the left side of the take-up spool into the spool holder on the left. 10. Adjust the take-up spool until the lugs on the spool holder lock into the notches on the take-up spool. 11. If there is any slack in the ribbon, remove it by turning the supply spool. IMPORTANT: Slack in the ribbon can cause a paper jam when making prints. November 2011