Kodak 6850 User Manual - Page 21

Label Setting Up the Printer 1. Remove the plastic cover from the new paper roll. IMPORTANT: Do not remove the label from the paper roll until you have successfully loaded the paper into the printer. Green paper flange Notches Lugs Black paper flange 2. Attach the paper flanges to each end of the paper roll. a. Line up the lugs on the green paper flange with the notches on the left side of the paper roll. b. Place the green paper flange on the left side of the paper roll. c. Place the black paper flange on the right side of the paper roll. NOTE: Be sure to match up the lugs on the green paper flange with the notches on the left side of the paper roll. If you do not attach the paper flange properly, the paper roll will not fit into the printer. 3. Open the paper door. The operator panel displays the Cover Open message. 4. Set the paper roll into the printer according to the green and black arrows on the label. 5. Remove the label from the paper roll. Alignment marks 6. Align the edge of the paper with the alignment marks on the paper guide. Paper guide November 2011 1-9