Kodak S1220 User Guide - Page 53

6. Reinstall the feed module by aligning the pins and pushing it toward the left to fit it into position. Be sure the gears are aligned and it snaps into place. Roll the feed module back into place. Vacuuming the scanner Cleaning the imaging area 7. Reinstall the feed module cover by aligning the tabs with the slots and pushing it back into position until it snaps into place. Before cleaning the imaging area, it is suggested that you vacuum the inside of the scanner to remove any dust and debris. 1. Wipe the upper and lower imaging area using a "Step 1" Brillianize Detailer wipe. Be careful not to scratch the imaging area when cleaning. 2. Wipe the upper and lower imaging area again using the "Step 2" Brillianize Detailer wipe to remove any debris and polish the surface. 3. When finished, close the scanner cover with both hands. 5-6 A-61601 February 2010