Kodak S1220 User Guide - Page 55

Replacement procedures Replacing the separation module and tires Kodak Scanners use replaceable tires that can feed a wide range of document types, sizes and thicknesses. Tire life and performance will vary based on the customer's document set, the frequency of cleaning the paper path and tires, and following the recommended schedule for changing tires. Nominal tire life is approximately 60,000 to 125,000 photos/pages. Usage figures are not guaranteed. Customer-operating environments, document type, the condition of photos being scanned, and not following the recommended cleaning and replacement procedures, can cause the life of the consumables to vary. You should change the tires if you notice an increase in multiple feeds, stoppages, or a decrease in feeder performance that is not resolved by following the cleaning procedures. NOTES: • Before beginning replacement procedures, disconnect the electrical power. • Certain paper types (such as carbonless paper or newsprint), failure to clean regularly, and/or use of non-recommended cleaning solvents can shorten roller life. 1. Push the separation module up to snap out and lift it out of position. • If you are replacing the separation module, insert the new separation module by aligning the tabs with the slots and snapping it into position. • If you are replacing the tires, continue with Step 2. 5-8 A-61601 February 2010