Kodak S1220 User Guide - Page 64
Keeping your scanner clean, quick, thorough
![]() |
UPC - 041778466193
View all Kodak S1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Keeping your scanner clean For best scanning results it is suggested that you frequently perform a quick cleaning sequence in between your routine, thorough cleaning procedures. This level of cleaning can be done frequently, perhaps as often as every 100 prints or when streaks appear on an image(s). Refer to Chapter 5, Maintenance for detailed cleaning procedures. To do a quick cleaning: 1. Open the scanner cover and look at the imaging area for any noticeable dust particles. 2. Wipe the imaging area with a microfiber cloth to remove any loose dust particles. 3. After wiping the glass, re-inspect for any visible dust particles. 4. Close the scanner cover and evaluate the subsequent scans. If streaking or other problems remain, it may be necessary to do a more thorough cleaning. You can: • Wipe the imaging area with Brillianize Detailer wipes. These wipes provide an excellent, alcohol-free cleaning process. This two-step process includes a wet de-static wipe and a dry siliconbased polish that leaves the scanner with a clean, clear, antistatic finish. • Run a transport cleaning sheet through the scanner to pick up loose dust particles, especially on the rollers. Depending on how dirty the scanner is, these sheets can be used several times. Discard the cleaning sheet when it is very dirty. • For more extensive cleaning, see Chapter 5. A-61601 February 2010 6-3
![](/manual_guide/products/kodak-s1220-user-guide-ec48b01/64.png)