Konica Minolta Kodak Truper 3610 User Guide - Page 9

Front view - Kodak Trūper 3210 Scanner Document guide Separation roller Feeder tray Feeder tray extension Back stopper ADF door Exit stopper ADF door release Auto/Manual feed select Flatbed Transport cover Exit tray Power indicator Power switch Stop/Start Exit tray - collects the documents after scanning. The scanned documents will be deposited face-down in the exit tray. Transport cover - provides access to internal components. Auto/Manual feed selector - set this selector to AUTO if you are feeding a stack of documents. If you are feeding documents one at a time, set the selector to MANUAL. ADF door release - push this button to open the ADF door. ADF door - provides access to the internal components of the scanner. Separation roller - allows the paper feed roller to feed a single document into the scanner. Document guides - slide the document guides in or out to accommodate the size of the documents you are scanning. Feeder tray - holds documents in place for automatic or manual scanning. The documents should be placed face-up to ensure they are scanned in the correct order. Feeder tray extension - pull this extension out to accommodate document sizes longer than 11 inches (279.4 mm). Back stopper - prevents documents from falling off of the exit tray if you lift the flatbed cover after the documents have exited from the scanner. Exit stopper - located on the exit tray, the exit stopper can be folded down or positioned to accommodate the length of the documents being fed through the scanner (not shown in this illustration). 1-4 A-61660 April 2010