Konica Minolta bizhub 160 bizhub 160 User Guide - Page 131
What Does Each Message Mean? - incorrect t c type
View all Konica Minolta bizhub 160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
6 6.9 What Does Each Message Mean? 6.9 What Does Each Message Mean? Message *REMOVE PAPER IN BYPASS TRAY* FRONT COVER OPEN CLOSE FRONT COVER DOCUMENT COVER OPEN CLOSE DOCUMENT COVER DOC.FEED COVER OPEN CLOSE DOC.FEED COVER MEMORY FULL PRESS ANY KEY MACHINE TROUBLE SERVICE CALL (C####) FUSER COVER OPEN CLOSE FUSER COVER PAPER JAM OPEN FRONT COVER INCORRECT T/C TYPE CHANGE T/C TEXT ×1.00 1 ä[A]ü #XXX: EMPTY Cause Paper is loaded in the Bypass Tray. The Front Cover of the main unit is open or not securely closed. Action Remove the paper from the Bypass Tray. Securely close the Front Cover. The Automatic Document Feeder is lifted up (while a document is loaded into it). Securely close the Automatic Document Feeder or remove the document from the Automatic Document Feeder. The Document Feeder Cover is Securely close the Document open. Feeder Cover. The size of the data for the scanned document has exceeded the capacity of the memory. Some problem occurred in the machine. Press the [Panel Reset] key, or turn the machine off, then on again. (The scanned data should be cleared from the memory.) Turn the machine off, then on again. If the error is still displayed, contact your service representative. The Fuser Cover of the main unit is open or not securely closed. Securely close the Fuser Cover. A paper misfeed occurred. All misfed paper was not removed from the main unit. Perform the misfeed-clearing procedure. (p. 6-16) The Fuser Cover of the main unit is open or not securely closed. Close the Fuser Cover, then open and close the Front Cover. Incorrect type of toner cartridge Install the correct type of toner is installed. cartridge. (p. 6-5) Toner cartridge is not installed. Install the toner cartridge. (p. 6-6) (While specifying copy settings) The selected paper tray has run out of paper. "#" indicates the paper tray, and "XXX" indicates the paper size. Either load paper of the specified size into the specified paper tray, or press the [Paper] key and select a different paper size. When a Message Appears Chapter 6 6-26 bizhub 160