Konica Minolta bizhub 160 bizhub 160 User Guide - Page 70
Making Copies, Tray 1, Bypss Tray
View all Konica Minolta bizhub 160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Making Copies Chapter 4 4.2 Selecting the Paper 4 7 Using the 10-Key Pad, enter the width (X) of the paper. ❍ To clear the entered value, press the [No/C] key. ✎ Note The width can range from 90 mm (3-1/2) to 216 mm (8-1/ 2). When entering the paper size, refer to the diagram on the right side of the screen to check which sides of the paper are the width and the length. Tray 1 90-216 ✎ Tip Enter the value by mm using the 10-key Pad. Refer to the conversion rate below. 1 inch = 25.4 mm Width(X) Length(Y) Bypss Tray Width(X) Length(Y) bizhub 160 4-7
4.2 Selecting the Paper
4
bizhub 160
4-7
Making Copies
Chapter 4
7
Using the 10-Key Pad, enter the
width (X) of the paper.
❍
To clear the entered value,
press the [No/C] key.
✎
Note
The width can range from
90 mm (3-1/2) to 216 mm (8-1/
2).
When entering the paper size,
refer to the diagram on the
right side of the screen to
check which sides of the paper
are the width and the length.
✎
Tip
Enter the value by mm using
the 10-key Pad. Refer to the
conversion rate below.
1 inch = 25.4 mm
90-216
Width(X)
Length(Y)
Width(X)
Length(Y)
Tray 1
Bypss Tray