Konica Minolta bizhub 160 bizhub 160 User Guide - Page 132
When Incorrect Copies Are Produced
View all Konica Minolta bizhub 160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
6.10 When Incorrect Copies Are Produced 6 6.10 When Incorrect Copies Are Produced Symptom The image is too light. The image is too dark. The copy is blurry. Possible Cause Action The density level for the Auto setting is set to "LIGHT". Adjust the setting for DENSITY LEVEL (A) in the Utility mode. (p. 5-22) Otherwise, cancel the "Auto" density setting, and then manually select the desired density setting. (p. 4-12) The density level is set to "LIGHT". Press the [Ö ] key, and then select a darker copy density. (p. 4-12) Does the message "TONER Change the Toner Cartridge EMPTY" appear in the Display? with a new one. (p. 6-6) The paper is damp. Change the paper. The density level for the Auto setting is set to "DARK". Adjust the setting for DENSITY LEVEL (A) in the Utility mode. (p. 5-22) Otherwise, cancel the "Auto" density setting, and then manually select the desired density setting. (p. 4-12) The density level is set to "DARK". Ö Press the [ ] key, and then select a lighter copy density. (p. 4-12) The Original Glass surface is Wipe the Original Glass clean dirty. with a soft, dry cloth. The original is not held tightly against the Original Glass. Place the original in position so that it is held tightly against the Original Glass. The paper is damp. Change the paper. When a Message Appears Chapter 6 bizhub 160 6-27