Konica Minolta bizhub 160 bizhub 160 User Guide - Page 93
Setting Up the Paper Sources
View all Konica Minolta bizhub 160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
5 5 Using the 10-Key Pad, enter the width (X) of the loaded paper. ❍ To clear the entered value, press the [No/C] key. ✎ Note The paper width can range from 90 mm (3-1/2) to 216 mm (8-1/2). When entering the paper size, refer to the diagram on the right side of the screen to check which sides of the paper are the width and the length. ✎ Tip Enter the value by mm using the 10-key Pad. Refer to the conversion rate below. 1 inch = 25.4 mm 6 Press the [Yes] key. 5.3 Setting Up the Paper Sources 90-216 Width(X) Length(Y) Using the Utility Mode Chapter 5 5-14 bizhub 160
5
5.3 Setting Up the Paper Sources
5-14
bizhub 160
Using the Utility Mode
Chapter 5
5
Using the 10-Key Pad, enter the
width (X) of the loaded paper.
❍
To clear the entered value,
press the [No/C] key.
✎
Note
The paper width can range
from 90 mm (3-1/2) to 216 mm
(8-1/2).
When entering the paper size,
refer to the diagram on the
right side of the screen to
check which sides of the paper
are the width and the length.
✎
Tip
Enter the value by mm using
the 10-key Pad. Refer to the
conversion rate below.
1 inch = 25.4 mm
6
Press the [Yes] key.
90-216
Width(X)
Length(Y)