Konica Minolta bizhub 160 bizhub 160 User Guide - Page 57
Placing the Original on the Original Glass, Precautions for Placing the Original on the Original
View all Konica Minolta bizhub 160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Before Making Copies Chapter 3 3 3.8 Loading Originals Placing the Original on the Original Glass The method for positioning the original differs depending on the type of original being used. Precautions for Placing the Original on the Original Glass Care should be taken when positioning the following types of originals. An original of a non-standard size: G The document size cannot be detected automatically. Press the [Paper] key or the [Zoom] key, and then select the desired paper size (p. 4-4) or zoom ratio (p. 4-10). A highly transparent original (OHP transparencies, translucent paper, etc.): G Place a blank sheet of paper of the same size over the original. A book or other three-dimensional object: G Let the machine scan the contents of the original with the Original Cover or the Automatic Document Feeder raised. Do not attempt to push the Original Glass with excessive force, as a malfunction could result. (The maximum load resistance of the Original Glass is 4-1/2 lb.) ✎ Note While scanning with the Automatic Document Feeder or Original Cover open, do not look directly at the bright light that may shine through the Original Glass. Although the light that shines through the Original Glass is bright, it is not a laser beam and, therefore, is not as dangerous. 3-26 bizhub 160